remap@hdi-tuning.co.uk Contact us Book appointment
Siemens SID807 remap

1.6 HDI 8V 115 2010 – 2015 Siemens SID807 EU5 Peugeot 208

2010–2015 1.6 HDI 8V 115 Diesel Siemens SID807
Stock 115BHP 285Nm
Stage 1 148BHP 340Nm
Gain +33BHP +55Nm
Power (BHP) Torque (Nm) Stock Stage 1 dyno
175 400 140 320 105 240 70 160 35 80 0 0 10002000300040005000 RPM 345 Nm 150 BHP
Recommended tool Dimsport MyGenius: flash this car over OBD yourself
Stage 1 remap incl. OBD programming tool £330
Buy now · £330
  1. 1Read ECU over OBD
  2. 2Files sent by email
  3. 3Program yourself
  • All tuning is developed in house - over 15 years of experience
S1

Stage 1

148BHP+33
340Nm+55
The Stage 1 Remap is designed to run safely on a standard car and does not need any modifications. Thanks to the Garrett GTC1244VZ turbo and the 8V head, this engine delivers strong early torque, this gets even better after a remap. The 1.6 HDI 115 engine typically ends up around 148BHP and 340Nm on a Stage 1 Remap. This remap is designed to run with the DPF in place and is road legal.
Stage 1 vs stock
Power +29%
115 148 BHP
Stock 115S1 148 (+33)
Torque +19%
285 340 Nm
Stock 285S1 340 (+55)
See the dyno chart ↑
S1+

Stage 1+

151BHP+36
350Nm+65
The Stage 1+ remap gives a little bit extra on top of the normal Stage 1 map. For this remap you need to modify the exhaust system to a 'straight through' style or a free flowing sports exhaust.
Stage 1+ vs stock
Power115 → 151 BHP
Stock
S1+
Torque285 → 350 Nm
Stock
S1+

Dyno graph for this stage coming soon.

S2

Stage 2

157BHP+42
365Nm+80
The stage 2 remap requires an intercooler upgrade, exhaust upgrade, and a good condtion engine. This option stays with the stock GTC1244VZ turbo, and we run a little more boost pressure than the Stage 1 setup.
Stage 2 vs stock
Power115 → 157 BHP
Stock
S2
Torque285 → 365 Nm
Stock
S2

Dyno graph for this stage coming soon.

S3.1

Stage 3 · Option 1

GTD1244VZ 819872 Conversion

160BHP+45
365Nm+80
This upgrade simply uses the GTD12 turbo instead of the GTC12. It does require custom mapping because the GTD12 turbo uses a billet compressor wheel and a slightly different VNT mechanism. This remap will offer better spool up, and is for those who needed to install a new turbo and wanted to ahve a small upgrade at the same time. Fitment and sizing is the same as the stock GTC turbo. This doens't really offer a big change in power because the size of the compressor is the same, but spool up is faster so the car will be more responsive. If there's nothing wrong with your stock GTC12 turbo, then there's not a lot of reason to do this upgrade, but if you have a spare turbo available or you need to repalce an old worn turbo, this is a good option.

Required hardware

  • GTD1244VZ 819872
Stage 3 · Option 1 vs stock
Power115 → 160 BHP
Stock
S3.1
Torque285 → 365 Nm
Stock
S3.1

Dyno graph for this stage coming soon.

S3.2

Stage 3 · Option 2

Hybrid GTC12 turbo

178BHP+63
380Nm+95
The Stage 3 remap uses a Hybrid GTC12 turbo fitted with a billet 49mm compressor. You will also need to fit a 3.5 bar map sensor, upgrade the intercooler, exhaust, clutch etc.
Stage 3 · Option 2 vs stock
Power115 → 178 BHP
Stock
S3.2
Torque285 → 380 Nm
Stock
S3.2

Dyno graph for this stage coming soon.

S3.3

Stage 3 · Option 3

Hybrid GTD12 49mm compressor

185BHP+70
390Nm+105
The Stage 3 remap uses a Hybrid GTD12 turbo fitted with a billet 49mm compressor with extended tips, it behaves like a 52mm comp with faster spool up. You will also need to fit a 3.5 bar map sensor, upgrade the intercooler, exhaust, clutch. This option is better than the GTC12 hybrid because the GTD12 has a better VNT mechanism, usually this remap will spool up a bit sooner when compared with a hybrid GTC12 turbo.

Required hardware

  • GTD12 49mm hybrid, Intercooler, Exhaust, 3.5 Bar MAP sensor
Stage 3 · Option 3 vs stock
Power115 → 185 BHP
Stock
S3.3
Torque285 → 390 Nm
Stock
S3.3

Dyno graph for this stage coming soon.

Siemens SID807

Programming method

Programming Methods – OBD2 or bench programming

We recommend to use only genuine tuning tools to program the Siemens SID807 over OBD. Dimsport MyGenius is able to do this over OBD by taking a virtual read and then offers full programming capabilities with the option to change maps whenever you choose. We can also work with you with other tools if you are a professional tuner.

Recommended programming method:

Program over OBD using the Dimsport MyGenius standalone tool

Advertising banner showing Dimsport MyGenius tool

The Dimsport MyGenius tool is the safest, easiest and most reliable way to program your ECU from home. Simply connect to the OBD port and let the tool do the work, no need to remove your ECU or bench program for most ECU types. For more information have a read here

How to - Programming via OBD Siemens SID807

  • We recommend Dimsport MyGenius if you want to program over OBD.
  • Initialise the tool using a laptop or desktop computer - the computer is not needed in the vehicle.
  • Connect a battery charger to the vehicle battery.
  • Connect to the OBD port of your car with MyGenius, follow the on screen instructions to read the ECU.
  • Connect MyGenius to your pc, email the read file to HDI Tuning with a description of what we need to do for you.
  • We will modify the software and send back to you. Add the file to the device using your computer.
  • Connect a battery charger to the vehicle battery.
  • Connect to the OBD port of your car with MyGenius, follow the on screen instructions to program the remap to the ECU.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!
More Peugeot

Other Peugeot remaps