Bosch MD1CS003 2020+ remap
1.5 BlueHDI 130 BHP DV5RC Bosch MD1CS003 EU6.3 Peugeot 208
2020–2026 1.5 BlueHDI 130 Diesel Bosch MD1CS003 2020+
Stock 130BHP 300Nm
Stage 1 152BHP 345Nm
Gain +22BHP +45Nm
Note: MD1CS003 ECUs built after 2020 require an unlock due to additional protection. Read more
Stage 1 postal remap £250
Buy now · £250 - 1Order online and post us your ECU
- 2We remap it in house
- 3We post it back to you, ready to fit
- All tuning is developed in house - over 15 years of experience
S1
Stage 1
152BHP+22
345Nm+45
Most post 2020 1.5 BlueHDI vehicles have a locked ECU which require a boot mode unlock. This effects ECUs with hardware numbers 0281037198 and higher. For example 0281037200, 0281039490, 0281039556.
The Stage 1 Remap is designed to run safely on a standard vehicle and does not need any modifications. With a Stage 1 remap your power goes up to 152BHP and torque will increase to 345Nm. This remap is designed to run with the DPF in place and is road legal.
The Stage 1 Remap is designed to run safely on a standard vehicle and does not need any modifications. With a Stage 1 remap your power goes up to 152BHP and torque will increase to 345Nm. This remap is designed to run with the DPF in place and is road legal.
Stage 1 vs stock See the dyno chart ↑
Power +17%
130 152 BHP
Stock 130S1 152 (+22)
Torque +15%
300 345 Nm
Stock 300S1 345 (+45)
Bosch MD1CS003 2020+
Programming method
Programming Methods – bench programming
The Bosch MD1 ECU needs to be bench mode programmed in bench service mode.
Some later MD1 ECUs after 2020 requirea boot mode unlock so that the ECU can be programmed.
More Peugeot
Other Peugeot remaps
Stage 1 postal remap £250 Buy now