remap@hdi-tuning.co.uk Contact us Book appointment
Siemens SID807 remap

Volvo S80 D2 1.6 8V EU5 115BHP 2010-2016 ECU Remapping

2010–2016 D2 1.6 8V Diesel Siemens SID807
Stock 115BHP 270Nm
Stage 1 148BHP 340Nm
Gain +33BHP +70Nm
Power (BHP) Torque (Nm) Stock Stage 1 dyno
175 400 140 320 105 240 70 160 35 80 0 0 10002000300040005000 RPM 345 Nm 150 BHP
Recommended tool Dimsport MyGenius: flash this car over OBD yourself
Stage 1 remap incl. OBD programming tool £330
Buy now · £330
  1. 1Read ECU over OBD
  2. 2Files sent by email
  3. 3Program yourself
  • All tuning is developed in house - over 15 years of experience
S1

Stage 1

148BHP+33
340Nm+70
The Stage 1 Remap is designed to run safely on a standard car and does not need any modifications. Thanks to the Garrett GTC1244VZ turbo and the 8V head, this engine delivers strong early torque, this gets even better after a remap. The 1.6D EU5 115 engine typically ends up around 148BHP and 340Nm on a Stage 1 Remap. This remap is designed to run with the DPF in place and is road legal.
Stage 1 vs stock
Power +29%
115 148 BHP
Stock 115S1 148 (+33)
Torque +26%
270 340 Nm
Stock 270S1 340 (+70)
See the dyno chart ↑
S1+

Stage 1+

151BHP+36
350Nm+80
The Stage 1+ remap gives a little bit extra on top of the normal Stage 1 map. For this remap you need to modify the exhaust system to a 'straight through' style or a free flowing sports exhaust.
Stage 1+ vs stock
Power115 → 151 BHP
Stock
S1+
Torque270 → 350 Nm
Stock
S1+

Dyno graph for this stage coming soon.

S2

Stage 2

157BHP+42
365Nm+95
The stage 2 remap requires an intercooler upgrade, exhaust upgrade, and a good condtion engine. This option stays with the stock GTC1244VZ turbo, and we run a little more boost pressure than the Stage 1 setup.
Stage 2 vs stock
Power115 → 157 BHP
Stock
S2
Torque270 → 365 Nm
Stock
S2

Dyno graph for this stage coming soon.

S3.1

Stage 3 · Option 1

GTD1244VZ 819872 Conversion

160BHP+45
365Nm+95
This upgrade simply uses the GTD12 turbo instead of the GTC12. It does require custom mapping because the GTD12 turbo uses a billet compressor wheel and a slightly different VNT mechanism. This remap will offer better spool up, and is for those who needed to install a new turbo and wanted to ahve a small upgrade at the same time. Fitment and sizing is the same as the stock GTC turbo. This doens't really offer a big change in power because the size of the compressor is the same, but spool up is faster so the car will be more responsive. If there's nothing wrong with your stock GTC12 turbo, then there's not a lot of reason to do this upgrade, but if you have a spare turbo available or you need to repalce an old worn turbo, this is a good option.

Required hardware

  • GTD1244VZ 819872
Stage 3 · Option 1 vs stock
Power115 → 160 BHP
Stock
S3.1
Torque270 → 365 Nm
Stock
S3.1

Dyno graph for this stage coming soon.

S3.2

Stage 3 · Option 2

Hybrid GTC12 turbo

178BHP+63
380Nm+110
The Stage 3 remap uses a Hybrid GTC12 turbo fitted with a billet 49mm compressor. You will also need to fit a 3.5 bar map sensor, upgrade the intercooler, exhaust, clutch etc.
Stage 3 · Option 2 vs stock
Power115 → 178 BHP
Stock
S3.2
Torque270 → 380 Nm
Stock
S3.2

Dyno graph for this stage coming soon.

S3.3

Stage 3 · Option 3

Hybrid GTD12 49mm compressor

185BHP+70
390Nm+120
The Stage 3 remap uses a Hybrid GTD12 turbo fitted with a billet 49mm compressor with extended tips, it behaves like a 52mm comp with faster spool up. You will also need to fit a 3.5 bar map sensor, upgrade the intercooler, exhaust, clutch. This option is better than the GTC12 hybrid because the GTD12 has a better VNT mechanism, usually this remap will spool up a bit sooner when compared with a hybrid GTC12 turbo.

Required hardware

  • GTD12 49mm hybrid, Intercooler, Exhaust, 3.5 Bar MAP sensor
Stage 3 · Option 3 vs stock
Power115 → 185 BHP
Stock
S3.3
Torque270 → 390 Nm
Stock
S3.3

Dyno graph for this stage coming soon.

Siemens SID807

Programming method

Programming Methods – OBD2 or bench programming

We recommend to use only genuine tuning tools to program the Siemens SID807 and SID807EVO ECUs over OBD. Dimsport MyGenius is able to do this over OBD by taking a virtual read and then offers full programming capabilities with the option to change maps whenever you choose. We have also tested the use of Kess with a virtual read and this can also successfully write the Ford SID807 ECU over OBD. Always add battery support to the vehicle to prevent a voltage drop during programming.

Recommended programming method:

Program over OBD using the Dimsport MyGenius standalone tool

Advertising banner showing Dimsport MyGenius tool

The Dimsport MyGenius tool is the safest, easiest and most reliable way to program your ECU from home. Simply connect to the OBD port and let the tool do the work, no need to remove your ECU or bench program for most ECU types. For more information have a read here

Programming via OBD Volvo SID807EVO

  • Obtain a suitable programming tool; we recommend to use Dimsport MyGenius, you can also use Kess V2.
  • Install the tool to a reliable laptop.
  • Connect to the OBD port of your car, make sure you have backup chargers to the vehicle battery and the laptop battery.
  • ID the ECU and then take a read of the ECUs flash memory.
  • Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
  • Send payment through our webshop.
  • We will modify the software and send back to you. This normally takes less than 2 to 3 hours during working days.
  • Using the same tool, ID then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!

Bench Programming via KTAG

  • Order a suitable tool such as Kess KTAG.
  • Install the tool to a reliable laptop.
  • The ECU must be removed from the vehicle, and then the lid can be carefully pried open and removed. The best way to do this is with 1 small flat head screw driver and one large. Carefully pry open the tabs around the ECU then gently get the larger screw driver and keep it inline with the metal support to the side. With a heat gun it will help soften the glue and the lid will come away more easily.
  • Connect necessary pins to ECU connector plug.
  • Connect boot pins and CNF to correct location. There are two processor types available on the SID807/SID807EVO ECU; TC1796 (2MB internal flash, 2MB external flash) and TC1797 (4MB Internal flash).
  • ID the ECU.
  • Take a read of all memories present.
  • Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
  • Send payment through our webshop.
  • We will modify the software and send back to you. This normally takes less than 2 to 3 hours during work days.
  • Using the same tool, ID then write to the ECU. This will overwrite the ECUs memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about, if you made a backup of all memories you’re extra safe in the event that something were to go wrong.
  • Straighten the lid on the ECU and seal with a little silicone.
  • Refit the ECU and start the engine.
  • Let your engine warm up and then take the car for a spin, enjoy the extra power!
More Volvo

Other Volvo remaps