remap@hdi-tuning.co.uk Contact us Book appointment
Bosch EDC16C39 remap

3.0 HDI 160 Euro 4 Boxer

2007–2011 3.0 HDI 160 EU4 Diesel Bosch EDC16C39
Stock 160BHP 400Nm
Stage 1 204BHP 490Nm
Gain +44BHP +90Nm
Power (BHP) Torque (Nm) Stock Stage 1 dyno
250 600 200 480 150 360 100 240 50 120 0 0 10002000300040005000 RPM 490 Nm 204 BHP
Recommended tool Dimsport MyGenius: flash this car over OBD yourself
Stage 1 remap incl. OBD programming tool £330
Buy now · £330
  1. 1Read ECU over OBD
  2. 2Files sent by email
  3. 3Program yourself
  • All tuning is developed in house - over 15 years of experience
S1

Stage 1

204BHP+44
490Nm+90
Stage 1 is designed to run on standard components, with no hardware upgrades required. Our calibrations are developed and tested in house. We focus on smooth, strong, progressive power delivery.

Drivability, economy and reliability are key. We aim to maximise power while staying within the safe limits of your engine.

On vehicles with an automatic gearbox, you can rest assured that gear changes stay smooth and seamless. Because we correctly edit the torque model in the engine ECU, the transmission control unit (TCU) can make use of the extra low-end torque and calculate the optimal point to shift up or down. The TCU also shifts down less often when the torque model shows that power is available, which makes the vehicle much nicer to drive and you won't be interrupted by unwanted kickdown unless it's actually required or if you specifically hit the kickdown point.
Stage 1 vs stock
Power +28%
160 204 BHP
Stock 160S1 204 (+44)
Torque +23%
400 490 Nm
Stock 400S1 490 (+90)
See the dyno chart ↑

Peugeot Boxer and Citroen Relay 3.0 HDI 16v 156 or 160 BHP EU4

When tuning your Peugeot boxer van or your Citroen Relay, you're not only looking for a nice power gain with smooth and progressive torque delivery but you're also looking for maximum reliability. That's where we come in. Whether it's your work van, a camper, or a minibus our Stage 1 performance software is designed to stay well within the limits of stock components whilst delivering the best possible performance without any compromise on reliability of the engine. Our Stage 1 remap will deliver 204 BHP and a nice consistent torque curve which peaks at 490Nm. Although we could easily take more power from this engine, when tuning a van we like to keep things as safe and reliable as possible, because most of the time they are used as a work horse and you need to be able to count on them. The HDI Tuning remap is guaranteed to outperform our competitors in terms of reliability and driveability, we've seen how they tune and we know that our remap for this engine type is much better, that's because we've been working with Diesel tuning for over 12 years now!
Bosch EDC16C39

Programming method

Programming Methods – OBD - MyGenius

Program from home over OBD using MyGenius. The only equipment you need is a battery charger to keep the vehicle power stable. A laptop is required to initialise the MyGenius tool, it is not used during programming. The tool is standalone and powered from the OBD port.

When you receive the tool, scan the QR code to download the software.
Connect the tool via USB to your computer and initialise the tool.
Now connect your battery charger to the vheicle battery, MyGenius to the OBD port.
Follow the on screen instructions to extract the data from the ECU.
Connect to the PC, send us the file, we remap and send it back.
Add the file to the tool with the computer, move back to the car and connect charger, connect MyGenius to the OBD port.
Follow the on screen instructions to program the ECU.

Programming via Bench service mode

Bosch EDC16 and EDC17 ECUs can be programmed in bench service mode without opening the ECU. This is the method we use when you send us your ECU using the postal remapping service. A full backup can be made of both the EEPROM and the internal flash memories.

Programming via BDM port or Boot mode with bench tool.

This is an old method with an open ECU, a boot pin must be connected to the board. We avoid this except for recovery when there is no comms in bench service mode.
More Citroen

Other Citroen remaps