Bosch MD1CS003 2020+ remap
1.5 BlueHDI 75 BHP DV5RE Bosch MD1CS003 EU6.3 Peugeot Rifter
2020–2026 1.5 BlueHDI 75 Diesel Bosch MD1CS003 2020+
Stock 75BHP 230Nm
Stage 1 152BHP 345Nm
Gain +77BHP +115Nm
Note: MD1CS003 ECUs built after 2020 require an unlock due to additional protection. Read more
Stage 1 postal remap £250
Buy now · £250 - 1Order online and post us your ECU
- 2We remap it in house
- 3We post it back to you, ready to fit
- All tuning is developed in house - over 15 years of experience
S1
Stage 1
152BHP+77
345Nm+115
Most post 2020 1.5 BlueHDI vehicles have a locked ECU, which requires a boot mode unlock. This effects ECUs with hardware number 0281037198 and higher. For example 0281037200, 0281039490, 0281039556.
Post 2020 models of the 75 and 100 variant come with the same turbo as the 130 engine (GTD1244VZ), so you can jump straight to 152 BHP Safely on a stage 1 remap. We can also give less power if you'd prefer that, such as the stock settings of the 1.5 130 engine.
The Stage 1 Remap is designed to run safely on a standard vehicle and does not need any modifications. This remap is designed to run with the DPF in place and is road legal.
Post 2020 models of the 75 and 100 variant come with the same turbo as the 130 engine (GTD1244VZ), so you can jump straight to 152 BHP Safely on a stage 1 remap. We can also give less power if you'd prefer that, such as the stock settings of the 1.5 130 engine.
The Stage 1 Remap is designed to run safely on a standard vehicle and does not need any modifications. This remap is designed to run with the DPF in place and is road legal.
Stage 1 vs stock See the dyno chart ↑
Power +103%
75 152 BHP
Stock 75S1 152 (+77)
Torque +50%
230 345 Nm
Stock 230S1 345 (+115)
Bosch MD1CS003 2020+
Programming method
Programming Methods – bench programming
The Bosch MD1 ECU needs to be bench mode programmed in bench service mode.
Some later MD1 ECUs after 2020 requirea boot mode unlock so that the ECU can be programmed.
More Peugeot
Other Peugeot remaps
Stage 1 postal remap £250 Buy now