The Peugeot Traveller 1.5 BlueHDI 75 Engine comes fitted with a very advanced Bosch MD1CS003 tuning protected ECU. There are many levels of tuning protection in this ECU but our advanced programming equipment and bespoke tuning software can overcome all of this safely, best of all we can program this ECU without needing to open or dismantle the ECU. We are currently using Bitbox and DimSport Trasdata to bench read this ECU which is a great bit of kit, our agents also use Auto Tuner, or Flex to program the Bosch MD1CS003 ECU.
Peugeot Traveller 1.5 BlueHDI 75 Stage 1 Remap (130 BHP
| 300 Nm
)
We’ve been working hard to bring to you the latest and most advanced remap available for the Peugeot Traveller 75 BHP 1.5 DV5RE BlueHDI Engine. As all components of the 75 BHP variant are identical to the 100 BHP variant we see large gains form a Stage 1 Remap.
Our Stage 1 remap will safely take your peak horse power to 130 BHP and peak torque is an exciting 300Nm with a smooth and consistent torque curve. We actually model this remap around the 130 BHP variant factory settings, so you will get great drivability and reliability.
The Peugeot Traveller 1.5 BlueHDI engine comes fitted with an MHI TD02L11 wastegate regulated turbo charger which delivers great early spool up characteristics and boasts great longevity. This turbo has been proven on the 1.6 eHDI and 1.6 BlueHDI variants over many years with a few small modernisations when applied to the 1.5 HDI Engine. We give a small increase in turbo pressure which stays within the safe tried and tested range of the TD02 turbo.
Price:
- Program yourself with the MyGenius OBD tool, includes a Stage 1 Remap for just £290!
- Already have a programming tool? Use our Online remap service for just £150
- Send us your ECU – Postal Remap Service from £200
- Drive in or mobile remap from £325
Programming Methods – bench programming
The Bosch MD1CS003 ECU currently needs to be bench mode programmed, there are not any OBD programming methods.
Bench mode does not require the ECU to be opened.
The following tools can program the MD1CS003 in Bench mode:
-Dimsport Trasdata
-Alientech Kess V3
-PCM Flash
-Bitbox
-Magic Motorsport FLEX
-AutoTuner
Useful to know – the later variants of the 75 and 100 BHP 1.5 HDI engine are fitted with the Garrett GTD1244VZ turbo, in this case your stage 1 remap goes straight to 150 BHP!