remap@hdi-tuning.co.uk Contact us Book appointment
Bosch EDC16C35 remap

1.6D 16V 110 Bosch EDC16C35 Mini Clubman R55

2005–2010 1.6D 16V 110 Diesel Bosch EDC16C35
Stock 110BHP 240Nm
Stage 1 143BHP 295Nm
Gain +33BHP +55Nm
Power (BHP) Torque (Nm) Stock Stage 1 dyno
175 350 140 280 105 210 70 140 35 70 0 0 10002000300040005000 RPM 295 Nm 143 BHP
Recommended tool Dimsport MyGenius: flash this car over OBD yourself
Stage 1 remap incl. OBD programming tool £330
Buy now · £330
  1. 1Read ECU over OBD
  2. 2Files sent by email
  3. 3Program yourself
  • All tuning is developed in house - over 15 years of experience
The Mini Cooper 1.6D 110 R56 model responds extremely well to a stage 1 remap. Not only do you get a massive amount of torque, you also get lots of top end power so you can keep pulling all the way through the rev range. Our online remapping service can provide a custom written tuning file with all parameters optimised, the software is written in house from your original ECU software.
S1

Stage 1

143BHP+33
295Nm+55
Our stage 1 remap for the Mini 1.6D will completely change the way your Mini drives. The Stage 1 remap delivers constant and increased torque through the entire rev range whilst remaining well within the safe limits of your clutch, dual mass flywheel and turbo charger. The torque curve will be smooth and stable and it won’t drop off at higher engine speeds making your Mini 1.6 Diesel a lot more fun to drive.

We’ve designed our stage 1 remap to run cleanly and in unison with the DPF system on the Mini 1.6D, this means that there is no increased risk of clogging the DPF filter as long as regular long journeys are undertaken by the vehicle. You can program the ECU yourself using our online remapping service. For this we recommend to use Dimsport MyGenius or the Kess V2 tool. With these tools you can you program directly over the OBD port without needing to remove the ECU.
Stage 1 vs stock
Power +30%
110 143 BHP
Stock 110S1 143 (+33)
Torque +23%
240 295 Nm
Stock 240S1 295 (+55)
See the dyno chart ↑
S1+

Stage 1+

Full Power Remap Mini 1.6D

143BHP+33
295Nm+55
The full power stage 1 remap from HDI Tuning will take your Mini 1.6D 110 to 143BHP and 295Nm. You can run a performance down pipe and exhaust system when using the Stage 1+ Remap. The Stage 1+ Remap is more aggressive and when used on a vehicle with a particle filter there is an increased risk of clogging, it's important to do regular long journeys to avoid that risk.
Stage 1+ vs stock
Power110 → 143 BHP
Stock
S1+
Torque240 → 295 Nm
Stock
S1+

Dyno graph for this stage coming soon.

S2

Stage 2

On the 1.6 110 model we generally skip the stage 2 step. The reason for this is so that we don’t over stress the turbo, we like to keep our remaps safe and reliable. Instead, if we want more power we need to fit a larger or stronger turbo charger such as a GTD1244VZ and also a larger intercooler. That's not to say you won't get more power if you're running a Stage 1+ remap with an intercooler and exhaust upgrade, you definitely will, we just won't push the turbo any harder than the Stage 1+ settings as these have proven to be safe and reliable over many years of testing for a standard GT1544V turbo.
S3.2

Stage 3 · Option 2

Option 2 GTD1244VZ

155BHP+45
320Nm+80
We have a great option for a turbo and injector upgrade, this upgrade is almost a direct fit and uses the turbo from the newer 1.6 engine. The GTD1244VZ uses fourth generation Garrett GTD technology which means earlier spool and better top end power. Another plus is that this turbo fits directly on to the stock exhaust manifold. To run this remap we also require you to upgrade to the 0445110297 injectors, fit a 3.1 Bar MAP sensor, performance down pipe and an EGR blank (for track use only). It’s well worth while to fit an uprated intercooler, with this you can push for nearer to 160 BHP (110 models from 2007 onwards will already have the 297 injectors fitted).
Stage 3 · Option 2 vs stock
Power110 → 155 BHP
Stock
S3.2
Torque240 → 320 Nm
Stock
S3.2

Dyno graph for this stage coming soon.

S3.3

Stage 3 · Option 3

Option 3

185BHP+75
370Nm+130
The next step up is to build a hybrid GTD12 using a 49mm compressor wheel (please contact for full specifications before building your turbo). To run this remap we also require you to upgrade to the 0445110297 injectors, fit a 3.1 Bar MAP sensor, performance down pipe and an EGR blank (for track use only). You will also need a large front mount intercooler with a straight through exhaust system of 2.5 inch. The clutch will need to be upgraded to at least a stage 2 Kevlar clutch, or better is a full stage 3 ceramic paddle clutch. Please see here for the full fitment guide.
Stage 3 · Option 3 vs stock
Power110 → 185 BHP
Stock
S3.3
Torque240 → 370 Nm
Stock
S3.3

Dyno graph for this stage coming soon.

S4

Stage 4

205BHP+95
380Nm+140
HDI Tuning have developed a completely custom turbo manifold kit to fit the 1.6 16V engine. The turbo used is a TF035 from a 2.2 Mitsubishi engine with a very modern VNT system. This turbo offers excellent spool and crazy top end power. Upgrades required:
  • TF035 manifold;
  • TF035 turbo;
  • 3.1 bar or 4 bar MAP sensor;
  • Turbo down pipe;
  • 2.5 inch exhaust system;
  • Large FMIC;
  • 0445110297 injectors;
  • The clutch will need to be upgraded to a full stage 3 ceramic paddle clutch.
Stage 4 vs stock
Power110 → 205 BHP
Stock
S4
Torque240 → 380 Nm
Stock
S4

Dyno graph for this stage coming soon.

Bosch EDC16C35

Programming method

Programming Methods – OBD - MyGenius

Program from home over OBD using MyGenius. The only equipment you need is a battery charger to keep the vehicle power stable. A laptop is required to initialise the MyGenius tool, it is not used during programming. The tool is standalone and powered from the OBD port.

When you receive the tool, scan the QR code to download the software.
Connect the tool via USB to your computer and initialise the tool.
Now connect your battery charger to the vheicle battery, MyGenius to the OBD port.
Follow the on screen instructions to extract the data from the ECU.
Connect to the PC, send us the file, we remap and send it back.
Add the file to the tool with the computer, move back to the car and connect charger, connect MyGenius to the OBD port.
Follow the on screen instructions to program the ECU.

Programming via Bench service mode

Bosch EDC16 and EDC17 ECUs can be programmed in bench service mode without opening the ECU. This is the method we use when you send us your ECU using the postal remapping service. A full backup can be made of both the EEPROM and the internal flash memories.

Programming via BDM port or Boot mode with bench tool.

This is an old method with an open ECU, a boot pin must be connected to the board. We avoid this except for recovery when there is no comms in bench service mode.