remap@hdi-tuning.co.uk Contact us Book appointment
Bosch EDC17C70 remap

1.5 TDCI 8V 95 DPF 2013 – 2018 Bosch EDC17C70 EU5 Ford B-Max

2013–2018 1.5 TDCI 8V 95 Diesel Bosch EDC17C70
Stock 95BHP 215Nm
Stage 1 126BHP 313Nm
Gain +31BHP +98Nm
Power (BHP) Torque (Nm) Stock Stage 1 dyno
150 400 120 320 90 240 60 160 30 80 0 0 10002000300040005000 RPM 313 Nm 126 BHP
Recommended tool Dimsport MyGenius: flash this car over OBD yourself
Stage 1 remap incl. OBD programming tool £330
Buy now · £330
  1. 1Read ECU over OBD
  2. 2Files sent by email
  3. 3Program yourself
  • All tuning is developed in house - over 15 years of experience
S1

Stage 1

126BHP+31
313Nm+98
The 1.5 TDCI from 2013 onwards fitted with the Bosch EDC17C70 ECU responds very well to a remap. The HDI Tuning Stage 1 remap will take you up to 126BHP and a whopping 313Nm of torque.
With a Stage 1 Remap the torque does not drop off and will continue to pull robustly through the entire rev range.

For a dyno plot see here.
Stage 1 vs stock
Power +33%
95 126 BHP
Stock 95S1 126 (+31)
Torque +46%
215 313 Nm
Stock 215S1 313 (+98)
See the dyno chart ↑
S3.1

Stage 3 · Option 1

150BHP+55
330Nm+115
We've developed an advanced VNT turbo upgrade remap for the 1.5 TDCI 95ps engine which uses the same turbo as the 1.5 120 BHP model.
The turbo used here is a GTD1244VZ 819872.

The injectors used are the same on both the 75, 95 and 120 BHP models so there is no need to upgrade these, although for maximum performance we would recommend an intercooler upgrade. Some models come without an intercooler from the factory, there must be an intercooler to run this remap. The Stage 3 Remap gives excellent performance figures with 330Nm torque and 150 BHP.
Power (BHP) Torque (Nm) Stock Stage 3 · Option 1 dyno
175 400 140 320 105 240 70 160 35 80 0 0 10002000300040005000 RPM 330 Nm 149 BHP
S3.2

Stage 3 · Option 2

GTD12 49mm Hybrid

180BHP+85
360Nm+145
We've developed a Hybrid VNT turbo upgrade remap for the 1.5 TDCI engine. The turbo used here is a GTD1244VZ 819872 with a billet 49mm compressor with 52mm extended tips. The compressor offers fast spool up whilst behaving like a larger 52mm compressor.

We found there is no need to upgrade the injectors for this remap. For maximum performance we would recommend an intercooler upgrade and a straight through exhaust system.
Power (BHP) Torque (Nm) Stock Stage 3 · Option 2 dyno
225 450 180 360 135 270 90 180 45 90 0 0 10002000300040005000 RPM 360 Nm 180 BHP
Bosch EDC17C70

Programming method

Programming Methods – OBD - MyGenius

Program from home over OBD using MyGenius. The only equipment you need is a battery charger to keep the vehicle power stable. A laptop is required to initialise the MyGenius tool, it is not used during programming. The tool is standalone and powered from the OBD port.

When you receive the tool, scan the QR code to download the software.
Connect the tool via USB to your computer and initialise the tool.
Now connect your battery charger to the vheicle battery, MyGenius to the OBD port.
Follow the on screen instructions to extract the data from the ECU.
Connect to the PC, send us the file, we remap and send it back.
Add the file to the tool with the computer, move back to the car and connect charger, connect MyGenius to the OBD port.
Follow the on screen instructions to program the ECU.

Programming via Bench service mode

Bosch EDC16 and EDC17 ECUs can be programmed in bench service mode without opening the ECU. This is the method we use when you send us your ECU using the postal remapping service. A full backup can be made of both the EEPROM and the internal flash memories.

Programming via BDM port or Boot mode with bench tool.

This is an old method with an open ECU, a boot pin must be connected to the board. We avoid this except for recovery when there is no comms in bench service mode.
More Ford

Other Ford remaps