Marelli MJD9 remap
2.3 JTD 140 Magneti Marelli MJ9 Fiat Ducato
2016–2019 2.3 JTD 140 Diesel Marelli MJD9
Stock 140BHP 350Nm
Stage 1 205BHP 450Nm
Gain +65BHP +100Nm
Stage 1 remap incl. OBD programming tool £330
Buy now · £330 - 1Read ECU over OBD
- 2Files sent by email
- 3Program yourself
- All tuning is developed in house - over 15 years of experience
S1
Stage 1
205BHP+65
450Nm+100
Stage 1 is designed to run on standard components, with no hardware upgrades required. Our calibrations are developed and tested in house. We focus on smooth, strong, progressive power delivery.
Drivability, economy and reliability are key. We aim to maximise power while staying within the safe limits of your engine.
On vehicles with an automatic gearbox, you can rest assured that gear changes stay smooth and seamless. Because we correctly edit the torque model in the engine ECU, the transmission control unit (TCU) can make use of the extra low-end torque and calculate the optimal point to shift up or down. The TCU also shifts down less often when the torque model shows that power is available, which makes the vehicle much nicer to drive and you won't be interrupted by unwanted kickdown unless it's actually required or if you specifically hit the kickdown point.
Drivability, economy and reliability are key. We aim to maximise power while staying within the safe limits of your engine.
On vehicles with an automatic gearbox, you can rest assured that gear changes stay smooth and seamless. Because we correctly edit the torque model in the engine ECU, the transmission control unit (TCU) can make use of the extra low-end torque and calculate the optimal point to shift up or down. The TCU also shifts down less often when the torque model shows that power is available, which makes the vehicle much nicer to drive and you won't be interrupted by unwanted kickdown unless it's actually required or if you specifically hit the kickdown point.
Stage 1 vs stock See the dyno chart ↑
Power +46%
140 205 BHP
Stock 140S1 205 (+65)
Torque +29%
350 450 Nm
Stock 350S1 450 (+100)
Marelli MJD9
Programming method
Programming Methods – Bench programming
Programming via OBD Marelli MJ8
- Obtain a suitable programming tool; we recommend to use Dimsport MyGenius, you can also use Kess V2.
- Install the tool to a reliable laptop.
- Connect to the OBD port of your car, make sure you have backup chargers to the vehicle battery and the laptop battery.
- ID the ECU and then take a read of the ECUs flash memory.
- Email the software to remap@hdi-tuning.co.uk along with a description of the remap you require.
- Send payment through our webshop.
- We will modify the software and send back to you. This normally takes less than 2 to 3 hours during working days.
- Using the same tool, ID then write to the ECU. This will overwrite the ECUs flash memory, it’s important not to interrupt the process. If you encounter any problems we can fix the ECU for you so there’s absolutely nothing to worry about.
- Let your engine warm up and then take the car for a spin, enjoy the extra power!
More Fiat
Other Fiat remaps
Ducato 2.0 JTD 84 8V 1999 - 2005 84 → 120 BHP Ducato Fiat Ducato 2.0 Multijet 110 110 → 188 BHP Ducato Fiat Ducato 2.0 Multijet 130 130 → 188 BHP Ducato Fiat Ducato 2.0 Multijet 160 160 → 188 BHP Ducato 2.2 HDI 130 16V 2010 – 2016 EU5 100 → 168 BHP Ducato 2.2 HDI 150 16V 2010 – 2016 EU5 130 → 168 BHP
Stage 1 incl. tool £330 Buy now