remap@hdi-tuning.co.uk Contact us Book appointment
Delphi DCM7.1A remap

2.0 BlueHDI 150 BHP 2019- now Delphi DCM7.1A Citroen C5 Aircross

2019–2026 2.0 BlueHDI 150 Diesel Delphi DCM7.1A
Stock 150BHP 370Nm
Stage 1 210BHP 460Nm
Gain +60BHP +90Nm
Power (BHP) Torque (Nm) Stock Stage 1 dyno
250 550 200 440 150 330 100 220 50 110 0 0 10002000300040005000 RPM 460 Nm 210 BHP
Recommended tool Dimsport MyGenius: flash this car over OBD yourself
Stage 1 remap incl. OBD programming tool £330
Buy now · £330
  1. 1Read ECU over OBD
  2. 2Files sent by email
  3. 3Program yourself
  • All tuning is developed in house - over 15 years of experience
S1

Stage 1

210BHP+60
460Nm+90
The Stage 1 Remap is designed to run safely on a standard vehicle and does not need any modifications. With a Stage 1 remap your power goes up to 210BHP and torque will increase to 460Nm. This remap is designed to run within the safe limits of your clutch and turbo charger.

This remap is designed to run with the DPF in place and is road legal.

The gains from this remap are large because the hardware is the same as the more powerful 180 model, only the software varies. If you would liike less power, we can also give the 180 BHP calibrations.
Stage 1 vs stock
Power +40%
150 210 BHP
Stock 150S1 210 (+60)
Torque +24%
370 460 Nm
Stock 370S1 460 (+90)
See the dyno chart ↑
S2

Stage 2

215BHP+65
490Nm+120
The Stage 2 Remap is designed for those running both an upgraded intercooler and also a straight through exhaust system. In most cases you will need to upgrade the clutch too.
Power (BHP) Torque (Nm) Stock Stage 2 dyno
250 600 200 480 150 360 100 240 50 120 0 0 10002000300040005000 RPM 490 Nm 215 BHP
Delphi DCM7.1A

Programming method

Programming Methods – OBD - MyGenius

Program from home over OBD using MyGenius. The only equipment you need is a battery charger to keep the vehicle power stable. A laptop is required to initialise the MyGenius tool, it is not used during programming. The tool is standalone and powered from the OBD port.

Programming via boot mode with open ECU

This is usually not required because this ECU can be programmed over OBD. We avoid this because it's time consuming and there is risk of damage to the board, whilst OBD programming is easy and safe.
More Citroen

Other Citroen remaps