remap@hdi-tuning.co.uk Contact us Book appointment
Delphi DCM6.2A remap

2.0 BlueHDI 120 BHP 2015 - 2019 Delphi DCM6.2A Citroen C Crosser

2015–2019 2.0 BlueHDI 120 Diesel Delphi DCM6.2A
Stock 120BHP 340Nm
Stage 1 205BHP 460Nm
Gain +85BHP +120Nm
Power (BHP) Torque (Nm) Stock Stage 1 dyno
250 550 200 440 150 330 100 220 50 110 0 0 10002000300040005000 RPM 458.3 Nm 205 BHP
Recommended tool Dimsport MyGenius: flash this car over OBD yourself
Stage 1 remap incl. OBD programming tool £330
Buy now · £330
  1. 1Read ECU over OBD
  2. 2Files sent by email
  3. 3Program yourself
  • All tuning is developed in house - over 15 years of experience
S1

Stage 1

205BHP+85
460Nm+120
The Stage 1 Remap is designed to run safely on a standard vehicle and does not need any modifications. With a Stage 1 remap your power goes up to 205BHP and torque will increase to 460Nm. This remap is designed to run within the safe limits of your clutch and turbo charger.

This remap is designed to run with the DPF in place and is road legal.

The gains from this remap are large because the hardware is the same as the more powerful 180 model, only the software varies. If you would liike less power, we can also give the 180 BHP calibrations.
Stage 1 vs stock
Power +71%
120 205 BHP
Stock 120S1 205 (+85)
Torque +35%
340 460 Nm
Stock 340S1 460 (+120)
See the dyno chart ↑
S2

Stage 2

210BHP+90
490Nm+150
The Stage 2 Remap is designed for those running both an upgraded intercooler and also a straight through exhaust system. In most cases you will need to upgrade the clutch too.
Stage 2 vs stock
Power120 → 210 BHP
Stock
S2
Torque340 → 490 Nm
Stock
S2

Dyno graph for this stage coming soon.

Delphi DCM6.2A

Programming method

Programming Methods – OBD - MyGenius

Program from home over OBD using MyGenius. The only equipment you need is a battery charger to keep the vehicle power stable. A laptop is required to initialise the MyGenius tool, it is not used during programming. The tool is standalone and powered from the OBD port.

Programming via boot mode with open ECU

This is usually not required because this ECU can be programmed over OBD. We avoid this because it's time consuming and there is risk of damage to the board, whilst OBD programming is easy and safe.
More Citroen

Other Citroen remaps