Peugeot 407 2.0 16V HDI 136 Delphi DCM3.4 Performance Remap:


Stage 1 Power


Stage 1 Torque

Peugeot 407

Peugeot 407 2.0 HDI 140 Stage 1 Remap DPF delete (Delphi DCM3.4) - Our Stage 1+ remap gives 170BHP and a torque increase to 390Nm. We've developed these remaps not only to give optimal performance, but also to remain within the limits of the stock hardware of your vehicle so you don't need to worry about your clutch or your dual mass flywheel. Power delivery will be smooth and constant through the entire engine range and will make overtaking much easier.

The 2.0 HDI 140 comes fitted with a DPF system, you'll need to remove this for the full power stage 1 remap. Luckily HDI Tuning Ltd have a safe and reliable DPF delete solution which won't give future problems (many other companies will use software to remove the DPF which can cause turbo problems).

Take a look at a dyno print out for the 2.0 136 engine:

2.0 16V 136 HDI Dyno print out - 165 BHP or 170 BHP

Peugeot 407 2.0 HDI Stage 1 DPF Safe Remap Delphi DCM3.4 - If you're looking for a power increase without modifying your car, then the best option for you is our DPF friendly remap. This keeps AFR high to prevent the DPF filter from clogging. You'll still get good power gains with 165 BHP and 370 Nm of torque.


Online price: If you have the correct equipment you can read/write the ECU yourself, the remap is just £99. You can program the DCM3.4 ECU direct through the OBD port using Kess V2, and then email the original software over to us. Make sure you connect a battery backup to the vehicle and the laptop during reading/writing of the ECU.

Postal remap service: The postal remap service is no recommended for this ECU as it requires extra soldering work, instead it's best to program direct through the OBD port using Kess V2.

Drive in service: If you're within driving distance of bristol, it's well worth bringing your car in to us for the complete in shop service. Not only is this much easier for yourself, but you also get a very thorough diagnostics/testing session included. You can leave our workshop knowing that your car is performingly properly will be aware of any other recommendations we make. If your car is in need of a service we can also do this before carrying out the remapping work at a very competitive price £200.

EGR Delete

The EGR is must be blanked with a blanking palte in order to run the EGR delete remap.

If you're not sure if you require EGR delete, please read here.

Contact HDI Tuning

Thank you
Error occurred while sending email. Please try again later.