1.6 BlueHDI 100 BHP 8v Tuning options (2016 onwards):


Stage 1 Power


Stage 1 Torque

1.6 BlueHDI SCR AdBlue diagram

HDI Tuning has the the most advanced remaps available for this engine type due to our extensive research and development, we can unlock the full potential of your Blue HDI whilst maintaining full reliability and remaining well within the engines safe limits. The Blue HDI Engines come fitted with a Bosch EDC17C60 tuning protected ECU. There are many levels of tuning protection in this ECU but our advanced porgramming equipment and bespoke tuning software can overcome all of this safely.

If you would prefer to program your vehicles ECU yourself, we suggest that you use a tool called KTM Bench.With this tool you can program the ECU without needing to open the lid in MEDC17 Boot loader boot.

Stage 1 Remap - 120 BHP

Our Stage 1 remap will take your 100 BHP BlueHDI to 120BHP and a whopping 295Nm of torque. Our stage 1 remap provides constant smooth torque through the entire rev range whilst remaining well within the safe limits of all engine components. The AdBlue and DPF systems will not be affected by this remap as we remain well within stock air fuel ratios to promote a clean soot less burn. Pricing: Postal remapping service £200, Online remapping service £150 (program yourself).

Stage 3 remap - 141 BHP

We've developed an advanced VNT turbo upgrade remap which uses the same turbo as the 1.6 120 BHP model. The turbo used here is a GTD1244VZ from the 1.6 120 model which is almost a direct fit. The injectors used are the same on both the 75, 100 and 120 BHP models so there is no need to upgrade these, although for maximum performance we would recommend an intercooler upgrade. This gives excellent performance figures with 320Nm torque and 150 BHP. Online remapping service, postal remap service: £400

Here is a fitment guide based on the older DS3 eHDI but fitment is the same except for the adblue catalyst. Here we recommend that you keep the AdBlue and DPF systems fitted to stay road legal: Turbo upgrade guide PDF file.

Dyno results-

Stage 1 remap with DPF fitted - 120 BHP

Citroen DS3 1.6 8V stage 3 setup with VNT turbo 141 BHP

SCR or Adblue Delete

If you are having problems with the SCR AdBlue system then we are able to offer a compete adblue and DPF delete solution, however we actually advise against this, it's better to keep the car road legal. If you can't fix it then we can remove it as a last resort.

Contact HDI Tuning

Thank you
Error occurred while sending email. Please try again later.